thumbnail
thumbnail
thumbnail
Threaded Flange
/ Standard Forged Flanges

Threaded Flange

Dimensions: 1/2”, 2”, 3”, 4”, 6”, 8”, 10”, Customized up to 24”
Material: Carbon, Alloy and Stainless Steel
Thickness: Schedule 10(S) to SCH 160
Standard: ASME, ANSI, DIN, JIS, EN, etc
Class Range: Class 150 to 2500 (# or LB). PN 2.5 to PN 250.
Flange Face Type: RF, FF, MFM, TG, RJ
End: plain end
Connection: threaded
Manufacturing Process: Forging
Product Description
China Threaded Flanges Supplier

We provide flange products of various standards, such as ASME/ANSI B16.5, EN, DIN, JIS standards, etc. We also provide customized threaded flange products.

we supportall ypes of flanges and can give you the best product quality at the most reasonable price.

Qucik Consultation
Customize Flanges
Thread Flanges Specitications

Standard

Type

Class

Size

ASME B16.5

WN/LWN/SO/Blind/Lap Joint

150#-2500#

1/2"-24"

ASME B16.47 Series A

WN/blind flange

150#-900#

22"-60"

ASME B16.47 Series B

WN/blind flange

75#400#600#

26"-60"

900#

26"-48"

EN1092-1:2002

Plate flange for welding/loose plate

PN2.5-PN100

DN10-DN4000

flange with weld-on plate collar or

for lapped pipe end/Blind/WN flange

JIS B2220

Welding Flange,Lap joint flange,threaded flange

PN6-PN100

DN10-DN1500

BS4504 BS10 TableD/E

Plate Flange for welding/WN flange/Blank Flange

PN6-PN100

DN10-DN1500

Sealing Surface

RF,FF,MFM,TG,RJ

Coating

Vanish,yellow paint,anti-rust oil,galvanizing etc

Thread Flange Materials & Grades

Threaded flanges are available in a variety of materials. These materials must meet the standards. The material should also meet the quality specified by ASTM or ASME standards. The thickness and inner diameter of the flange depend on the size of the pipe for which this Threaded flange is manufactured.

Carbon steel flanges are commonly used manufacturing materials for Threaded flanges. You can choose the appropriate material according to the medium of the pipeline. You can choose ASTM A105 for normal temperature, ASTM A350 for low temperature, and ASTM A694 for high temperature.

Flanges are available in a variety of grades, such as ASME B16 5, ASME B16 47 “A” series and “B” series to meet the needs of customers and industries.

In addition to this material, Threaded flanges are also available in stainless steel and alloy steel, which have material properties such as corrosion resistance, high temperature resistance, and wear resistance. At the same time, we also have duplex steel materials to meet the technical requirements of various pipelines of customers. The following table shows the grades of these common materials:

Material

Grade

Carbon Steel

ASTM A105. 20#. Q235. 16Mn. ASTM A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2,ASTMA694 F42, F46. F48. F50. F52,FSG. F60. F65.F70

Alloy Steel

ASTM A182F1,F5a,F9,F11,F12,F22,F91,A182F12,A182F11,16MnR,Cr5Mo,12Cr1MoV,15CrMo,12Cr2Mo1,

A335P22,St45.8/Ⅲ;

Stainless Steel

ASTM A182 F304,304L,F316,316L,1Cr18Ni9Ti,OCr18Ni9Ti,321,18-8;

Duplex and Super Duplex

ASTM/ASME A/SA 182 F44,F45,F51,F53,F55,F60,F61,

S31803,S32205,S32550,S31254,SMO254,S32750,S32760,S32950

Nickel Alloy Steel

ASTM/ASME B/SB151 UNS NO7060,71500,C70600 (CuNi 90/10),C71500(CuNi 70/30)

UNS N08825(INCOLOY 825),UNS N06600(INCONEL600),UNS N06601(INCONEL601),

UNS N06625(INCONEL625),UNS N10276(HASTELLOY C276)

ASTM/ASME B/SB151 UNS N07060,71500,C70600(CuNi 90/10),C71500(CuNi 70/30)

Copper Alloy

ASTM/ASME B/SB151 UNS NO7060,71500,C70600 (CuNi 90/10),C71500(CuNi 70/30)

 

Threaded Flanges Dimensions

Below we have listed some sizes of Threaded Flanges (Class 150) under ASME B16.5 (1/2″ to 24″)

Threaded Flange
 
  • 1/2″ NPS flange with 1/2″ NPT threads has an outer diameter of 3.50″. The raised face thickness is 0.62″ and has 4 bolt holes.
  • 3/4″ NPS flange with 3/4″ NPT threads has an outer diameter of 3.88″. The raised face thickness is 0.62″ with 4 bolt holes.
  • 1″ NPS flange with 1″ NPT threads has an outer diameter of 4.25″. The raised face thickness is 0.68″ and the standard bolt holes are 4 numbers.
  • 2″ NPS flange with 2″ NPT threads has an outer diameter of 6.00″. The raised face thickness is 1.00″ and the flange has 4 bolt holes.
  • 5″ NPS flange with 5″ NPT threads has an outer diameter of 10.00″. The raised face thickness is 1.44″, and it has 8 bolt holes.​​​​​​​
  • 6″ NPS flange with 6″ NPT threads has an outer diameter of 11.00″. The raised face thickness is 1.56″, and it has 8 bolt holes.​​​​​​​
  • 10″ NPS flange with 10″ NPT threads has an outer diameter of 16.00″. The raised face thickness is 1.94″, and it has 12 bolt holes.
  • 20″ NPS flange with 20″ NPT threads has an outer diameter of 27.50″. The raised face thickness is 2.87″, and it has 20 bolt holes.
  • 24″ NPS flange with 24″ NPT threads has an outer diameter of 32.00″. The raised face thickness is 3.23″, and it has 20 bolt holes.

                             ASME B16.5 Class 150 Flanges |Threaded Flange

 

Standardized Threaded Flanges
  • Threaded Flanges are commonly standardized as ASME B16.5, with sizes ranging from 1/2 inch to 60 inches.
  • Sealing surface types include raised face(RF),flat face(FF),dimpled face(MFM),tongue and groove (TG),ring joint(RJ),and so on.
  • Applicable pressure classes include Class 75,150,300,400,600,900,1500,and 2500.

ASME B16.47 Series A

Threaded Flanges

ASME B16.47 Series B

Threaded Flanges

ASME B16.5

Threaded Flanges

\ Class 75 \
Class 150 Class 150 Class 150
Class 300 Class 300 Class 300
Class 400 Class 400 Class 400
Class 600 Class 600 Class 600
Class 900 Class 900 Class 900
\ \ Class 1500
\ \ Class 2500

ASME B16.47 Series A &Series B,ASME B16.5 Threaded Flanges Table

Customized Threaded Flanges Process
 

Raw Materials

Raw material inspection by heat number; Chemical composition inspection.

Cutting

Material identification; Production flow card.

Heating

Material identification; Furnace temperature monitoring; Heating temperature control.

Forging & Ring Rolling

Semi-finished size inspection; Visual inspection.

Rough Machining

Dimensional inspection; Ultrasonic Testing (UT).

Heat Treatment

Heat treatment records and charts; Furnace condition inspection; Hardness testing; Chemical composition and mechanical property inspection.

Finish Machining

Visual inspection; Dimensional inspection of 50% of products; Production flow card.

Finished Goods Inspection

Positive Material Identification (PMI); Marking inspection; Dimensional inspection.

Packing

Packaging inspection; Visual inspection.

Shipment

Shipment according to customer requireme

Customize It Now  Free Consulting

 More reading:

  • ASME B16.47: Differences Between Series A & Series B Flange
  • How We Make A Flange: Flange Manufacturing Process
Image Gallery

 Here are various weld neck flanges produced by Shanxi HongKai Forging Co., Ltd. You can click on the pictures to enlarge them,Shanxi HongKai Forging Co., Ltd.  supports all types of flange production.

Threaded Flange

 
Threaded Flange
 
 

ABOUT HongKai

Shanxi HongKai Forging Co., Ltd. was located in Dingxiang County, known as the "Hometown ofForging" in Shanxi Province, which is part of Chinese energy and heavy chemical industrial base. Thearea boasts convenient transportation, abundant coal and power resources, fast communication, and an excellent environment. The company has three big workshops in total.

 

Along with capabilities in forging and heat treatment,Integrated production capabilities includingmachining, physical and chemical testing, surface treatment, and packaging and shipment. Possessingsolid technical expertise, advanced production processes, and a complete quality inspection, reliableafter-sales service, for customers worldwide and domestically multiple clients have provided a solid foundation for collaboration.

 

In addition,we can provide a variety of customized flanges ​​​​​​​and pipe fittings.Customers can give drawings or samples,and our company will produce them to fit your specific requirements.

Learn more about  HongKai << 

 
300+

Number Of Workers

 
85+

Mid&Senior Engineers

 
150,000

Square Meters of Area

 
25+

Years of Experience

Threaded Flange

Our Production Line 

Our company has 8 pipe fitting production lines and 5 flange production lines. It has a full set of medium-frequency elbow hot-pushing machines, hot-die presses for reducers, cold-extrusion hydraulic presses for tees, forging hammers, vertical lathes, drilling machines, and other process-forming and mechanical processing equipment.

 

Among them, the Φ1020 mm large-diameter medium-frequency hydraulic pushing machine, Φ1420 mm large-diameter medium-frequency bending machine, and Φ2438 mm 4,000-ton large hot-die press have an annual production capacity of more than 80,000 tons.

 
8

Pipe Fitting Production Lines

 
5

Flange Production Lines

 
80,000 tons

Annual Production Capacity

 

Threaded Flange

 

Quality  Testing  & Certificates

Threaded Flange

 

FAQs

Q:What is Threaded Flanges?

A:Threaded flanges are non-welded flanges that attach to pipes using threads. The procedure converts the flange’s inner hole into pipe threads, allowing for threaded pipe connections without the need for welding.

Threaded flanges are easy to install and maintain, require no welding, and are suitable for pipelines where welding is not permitted on-site. The additional torque generated on the cylinder or pipe when the flange is deformed is minimal. However, the flange is thicker and more expensive, making it suitable for high-pressure pipeline connections.

Q:What Are ASME/ANSI B16.5 Threaded Flanges Used For?

A:ASME/ANsI B16.5 Threaded Flanges are wdely used in lowpressure piping systems, as no welding s involved while connecting the fanges to pipes or otherequipment. However, the Female Threaded fange may be welded around the joint after assembly. but it is not considered a satisfactory method of increasing its  applications.

Q:What's The Difference Between Threaded And Flanged?

A:Threaded connections are almost the polar opposite of flange connections. Rather than fitting pieces together using multiple parts, threaded connections are rimmed with matching grooves, one on the outside of a piece and the other on the inside.

Q:What Are The Types Of Flanges?

A:The key types of flanges are the welding neck, long welding neck, slip-on, socket weld, lap joint, and threaded, and blind flanges. In addition to these standard flanges, some special ones exist, called Weldoflange/Nipoflange and Elboflange, swivel flange, expander/reducer flange, and orifice flanges.

Q:What Are Threaded Unions Used For?

A:A union is a threaded fitting that allows the pipework to be separated and reconnected without any horizontal movement in the pipe. It can be a standalone pipe fitting connecting two pieces of pipe, or an integral part of another fitting (such as a ball valve) that allows it to be separated.

Q:What Is The Threaded Connection?

A:Threaded connections are often referred to as a process connection type. For Dwyer product specifications, this connection type is typically NPT (National Pipe Thread), which is an American standard thread. These connections allow products to be installed directly into piping or with the use of threaded fittings.

Fast Response

Clear Communication, and Reliable Technical Support